Is Your Furnace Blowing Cold Air? You Might Need HVAC Repair in St. Louis, MO

If you aren’t a trained HVAC technician, there are a multitude of things about your system that you might not understand. Even though some of the aspects of your system’s functioning can be confusing, at the very least you should be able to expect that hot air will come out of your furnace—or at least that’s what you would think.

Unfortunately, you can’t always count on this fact, and there are certain factors that may cause your furnace to begin blowing cold air instead of warm air. This certainly won’t help you stay comfortable during the winter months, so it’s important to identify the issue and get HVAC repair in St. Louis, MO when necessary in order to solve the problem. When cold air is coming out of your furnace, here are some of the things that might be going on:

  • Your pilot light is out: Your pilot light should be on all the time in order to ignite your fuel and begin the heating process for your furnace. If the light is out, your furnace will not be able to burn gas, so your air won’t be heated as it normally would be. There are a number of reasons why your pilot light might be out, and the solution might be as simple as reigniting the light. If this doesn’t work, try checking to make sure that gas is flowing. If your light won’t stay lit no matter what, there’s an issue with your system that will likely require professional HVAC repair in St Louis, MO.
  • The settings on your thermostat are off: The first thing you should do when your furnace is blowing cold air is to check the thermostat settings. If your fan is set to “on,” it will be blowing regardless of whether your air is being heated or not. Setting your fan to “auto” will ensure that it only blows air when the furnace is turned on and heating your air.
  • Your furnace is overworked: The filters in your system are responsible for catching debris and contaminants so that they aren’t circulated through your home. If you don’t care for or change out these filters regularly, they can accumulate an excessive amount of debris and restrict airflow in your system. When airflow is restricted, your furnace has to work much harder and it can become overworked and overheated. An overheated furnace will often turn off automatically as a safety precaution. If this is the issue, you should try to clean your filters, or simply replace them.

Whether your furnace is blowing cold air or you’re due for a seasonal system service check, you can get help from the professionals here at Ashley Brothers Heating & Cooling. We have been offering residential and commercial HVAC repair in St. Louis, MO to our customers since 1999. Our years of experience have given us the ability to provide exceptional installation, repair and maintenance services that fit our customers’ exact needs and circumstances. We understand that your HVAC system can pose some unique problems, which is why our team takes the worry off of your shoulders to help you ensure that your system is running effectively and efficiently. Give us a call today for more information!

Why Some Systems Installed by HVAC Companies in St. Louis, MO Use Heat Pumps Instead of Gas

Controlling the climate in your home or business is important, especially during the winter months when temperatures can dip below freezing. A heating system allows you to adjust the temperature in your home to keep it comfortable for you, your family and your guests. If you’re a business owner, it’s important to maintain a comfortable environment for your employees and any visitors or customers who might come by.

Regardless of your setting, there will generally be one of two types of heaters in use: gas or heat pump. Gas furnaces heat your home or business by burning natural gas, whereas heat pumps operate as a sort of air conditioner in reverse, using refrigerant and electricity rather than a fuel source to heat the air. There are a few major differences between these types of heating system and, depending on your specific needs, you might find that one is a better choice for you:

In the end, much of your decision about whether to choose a heat pump or a gas furnace will be dependent on your specific circumstances. If you need help deciding which option would be best for you, or if you want to invest in a new heating system for your home or business, you can contact Ashley Brothers Heating & Cooling, one of the premier HVAC companies in St. Louis, MO. Our team of experienced professionals is here to assist you with all of your heating and cooling needs, from the installation of a brand-new system to repairs for your current unit. No matter what you need help with, you can reach out to us for assistance.

Why Is an Air Conditioner’s Capacity Measured in Tons?

When we visit our customers for AC repair in St. Louis, MO it often confuses them to hear us refer to their air conditioner’s capacity using the word “tons.” They’ll look at a three-ton unit and say in disbelief, “That thing really weighs three tons?”

If the word “ton” here referred to weight, a three-ton AC would be too big for your back yard. Luckily it is not referring to weight at all, but rather to a measurement of how much heat it can remove from your house.

Answering this question is going to be fun, because it requires taking a little bit of a peek back in time.

The answer

The first thing to know is that people used to use ice to cool homes and refrigerate foods, and the measurement of an AC unit’s heat-removing capacity reflects this. A three-ton AC removes heat at a rate that a three-ton block of ice would, if it removed heat evenly and melted completely across 24 hours. Confusing? Here’s a simpler way to think about it. A three-ton AC unit is like putting a 6,000-pound block of ice in your home every day. Just without the mess, of course.

It may seem strange that ACs are measured using such an abstract standard, but it’s not strange at all when you think about how the power of other modern machines are measured. Just think about a car’s horsepower. ACs are more or less measured in ice power. So with both machines, their power is explained in terms of the things they were replacing: blocks of ice for the AC, and horse-drawn carriages for the cars.

The math

Here’s how that translates into math. A one-ton block of ice melting evenly across 24 hours would absorb heat at a rate of about 12,000 BTU/hour—one BTU can be understood as being about the same amount of heat caused by burning one match all the way down. So if you have a three-ton unit, it removes about 36,000 BTUs of heat from your home per hour, and about 864,000 BTUs per day. The heat of one match might not seem like much—but now picture the heat of 864,000 matches. Your AC unit’s pretty amazing, isn’t it?

The bottom line

What would your ancestors—after returning home from the market on their horse-drawn carriage, chipping new ice for their rooms, hour after hour, just trying to stay bearably cool—say if they could step into your home and enjoy the effortless cool that your AC provides, knowing it does not require moving three tons of ice into the house, bit by bit, in order to enjoy that cool feeling? They’d probably say, “Are you kidding me?” and then beg you to switch places. What do you think?

We hope you enjoyed this little history lesson. We know we really enjoyed answering your question! If you’ve got more questions, give us a call here at Ashley Brothers Heating & Cooling. We’re experts in AC repair in St. Louis, MO, and we’ve got the knowledge and expertise to get the job done right.

Do Portable Air Conditioner Towers Save More Electricity Than a Normal AC Unit?

We hear this question a lot: Do portable air conditioners save more electricity—and thus, more money—than standard AC units? And the simple answer to that is, no!

There may be some benefits to portable AC units, but conserving electricity is not one of them.

So, why are standard AC units more efficient?

Portable air conditioner towers are standalone air conditioners that can be moved from room to room. They condense and cool air, and then pump their hot air through an exhaust tube that can be set up to blow out any window. Their main benefit is their convenience. But when it comes to energy efficiency, they’re nowhere near the level of a standard air conditioning installation in St. Louis, MO.

There are several reasons why this is so:

Overall, the basic design of a portable system means it just can’t compete with standard AC units. They are only really useful if you live somewhere that’s almost always a habitable temperature and you’re only likely to need AC a few days a year. Otherwise, you’re better off with a standard AC setup.

Ashley Brothers Heating & Cooling has been providing air conditioning installation in St. Louis, MO since 1999, and we can help you get the best AC solution for your house. We install and consult, so give us a call if you’re thinking about home cooling.

Your Air Conditioning Service in St. Louis, MO Recommends Changing Your Air Filter Every Month

When was the last time you changed the air filter in your AC unit? If it has been a while, you may want to consider changing it sooner rather than later. According to your air conditioning service in St. Louis, MO, changing your air filter every month can greatly improve the performance of your cooling system, as well as provide you with the following benefits:

Remember that your air conditioning service in St. Louis, MO recommends changing your air filter every month, so you too can take advantage of these cooling benefits. When your AC unit needs a tune up, call Ashley Brothers Heating & Cooling. We look forward to helping you stay cool and comfortable all summer long!